Hybrid integration method for highly maneuvering radar target detection based on a Markov motion model

To detect highly maneuvering radar targets in low signal-to-noise ratio conditions, a hybrid long-time integration method is proposed, which combines Radon-Fourier Transform (RFT), Dynamic Programming (DP), and Binary Integration (BI), named RFT-DP-BI. A Markov model with unified range-velocity quantification is formulated to describe the maneuvering target’s motion. Based on this model, long-time hybrid integration is performed. Firstly, the whole integration time is divided into multiple time segments and coherent integration is performed in each segment via RFT. Secondly, non-coherent integration is performed in all segments via DP. Thirdly, 2/4 binary integration is performed to further improve the detection performance. Finally, the detection results are exported together with target range and velocity trajectories. The proposed method can perform the long-time integration of highly maneuvering targets with arbitrary forms of motion. Additionally, it has a low computational cost that is linear to the integration time. Both simulated and real radar data demonstrate that it offers good detection and estimation performances.     

液体火箭发动机健康监控技术研究现状

液体火箭发动机健康监控技术是改进和提高运载火箭、航天器可靠性与安全性的核心技术之一,对其进行研究具有重要的学术价值和工程应用价值。液体火箭发动机健康监控技术的研究主要包括液体火箭发动机故障检测与诊断理论方法、液体火箭发动机健康监控系统两方面。该文介绍了基于模型驱动的方法、基于数据驱动的方法和基于人工智能的方法,阐明了液体火箭发动机故障检测与诊断理论方法的研究现状,通过对美国液体火箭发动机典型健康监控系统的介绍,阐明了液体火箭发动机健康监控系统研究的若干进展及现状,并对液体火箭推进系统健康监控技术的演变趋势作了简要评述。     

高超声速滑翔再入定向定速打击末制导算法

以具有终端落角和落速约束的小升阻比短距滑翔高超声速再入打击飞行器为研究对象，通过引入弹道调整段来实现对飞行器的初步大幅度减速，并使其满足中末制导交班条件，以解决飞行器捕获目标后难以直接对其进行定向定速打击的问题。首先设计了一种变角偏差反馈系数的偏置比例制导律，解决了末端攻击段弹道下压困难以及导引头视场稳定跟踪等问题。在此基础上，建立了一种基于攻角和弹道倾角估计的末端减速指令生成方法，有效解决了基于理想速度曲线减速控制方法精度不足的问题。因此，数值仿真结果表明该制导方案能够有效控制飞行器终端落角和落速，并具有较高的制导精度。     

预旋喷嘴径向角度对预旋特性影响的数值研究

为了降低低位进气预旋流路的气动损失，针对带有不同径向角度（0°~30°）预旋喷嘴的预旋系统进行了数值仿真，并对流动特性、温降特性和比熵增特性进行了分析。结果表明:随着预旋喷嘴径向角度的增大，预旋系统无量纲温降先增大后减小，流动阻力减小，预旋系统的流量随之增大。旋转雷诺数为2.3×107时，预旋喷嘴带径向角度的预旋系统无量纲温降比传统喷嘴最大可提高18.3%，存在某一角度使预旋温降特性达到最好。预旋系统内的耗散主要发生在预旋腔和共转盘腔内，径向角度为10°时其比熵增变化量分别占整个预旋系统总体比熵增的42.4%和30.2%；合理设计预旋喷嘴的径向角度，能改善预旋腔内气流的流动效果，并且可以减少整个预旋系统的不可逆损失。      

基于CCFHTLS算法的异步电动机转子故障检测

定子电流经低通滤波器处理后产生高斯有色噪声,限制了异步电机转子故障检测算法的辨识精度。针对该问题,提出一种抑制高斯有色噪声的异步电机故障检测技术。首先对采集到的定子电流进行预处理,利用逆同步旋转变换剔除基波,避免了直接检测时基波对故障辨识精度的影响。然后利用互相关函数(CCF)处理技术对高斯有色噪声的抑制作用,提出基于CCFHTLS算法的电机转子故障诊断技术。针对异步电机转子断条和偏心故障的识别进行试验,结果表明CCFHTLS算法可以有效抑制高斯有色噪声,并保留故障有用信息,显著地提高了故障检测的分辨率。     

HB-2 high-velocity correlation model at high angles of attack in supersonic wind tunnel tests

Responding to a need for experimental data on a standard wind tunnel model at high angles of attack in the supersonic speed range, and in the absence of suitable reference data, a series of tests of two HB-2 standard models of different sizes was performed in the T-38 trisonic wind tunnel of Vojnotehnickˇi Institut(VTI), in the Mach number range 1.5–4.0, at angles of attack up to+30°. Tests were performed at relatively high Reynolds numbers of 2.2 millions to 4.5 millions(based on model forebody diameter). Results were compared with available low angle of attack data from other facilities, and, as a good agreement was found, it was assumed that, by implication, the obtained high angle of attack results were valid as well. Therefore, the results can be used as a reference database for the HB-2 model at high angles of attack in the supersonic speed range, which was not available before. The results are presented in comparison with available reference data, but also contain data for some Mach numbers not given in other publications.     

基于双火花塞点火策略的活塞式航空煤油发动机爆震控制

在一台650 mL单缸活塞式航空发动机上,针对双火花塞点火方式对活塞式航空煤油发动机的爆震控制进行了试验研究。结果表明:采用两个火花塞同步点火,且将点火提前角推迟可以有效的抑制爆震,同时燃烧放热率幅值逐渐降低,整体燃烧相位逐渐推迟;采用双火花塞异步点火随着点火提前角点火相位差的增加,爆震强度逐渐降低,通过匹配主火花塞点火提前角与副火花塞点火提前角可进一步提升发动机的动力性。      

基于YOLO智能网络的红外弱小多目标检测技术

复杂背景下的红外弱小多目标检测是红外目标检测的难点,现有算法的稳健性难以满足实际弹载应用需求。针对弹载环境下的红外场景图像开展了基于典型深度学习网络模型的目标检测应用研究,提出一种基于YOLO(you only look once)网络的智能目标检测方法,通过高维特征学习表征和推理实现红外弱小多目标检测。采用传统的模板匹配算法和YOLO深度学习算法进行识别性能对比分析,验证了YOLO网络在红外弱小多目标检测方面的良好性能。实验结果表明:YOLO算法的检测概率可达92.2%,平均检测精度为0.844,与传统的模板匹配方法相比,YOLO具有明显的优势。     

分组级短码长LT喷泉码的工程应用

针对LT喷泉码在准单向链路、高差错、链路恶劣易中断的信道环境应用时出现的运算量大、译码时延长、编码效率较低等问题,文章提出使用基于数据分块的分组级短码长喷泉码方案。其思想是将短码长LT码方案和分组级LT码方案结合起来,并且在数据子块的度序列生成过程中加入度值检测机制。实验仿真结果表明:与已提出的LT码方案相比,该方案能够有效地降低译码开销、计算代价和译码时延,提高系统的最大传输效率。     

SF6分解气的近红外在线检测技术研究

为满足SF6绝缘电气设备故障监测与预警的实际需求,分析了国内分解气检测研究现状.对比近红外与中红外吸收光谱检测技术,提出近红外吸收光谱技术在线检测的技术方案.计算分析待测气体特征谱线的吸收系数、吸收光程和电路信噪比对精度的影响,完成系统参数设计.提出SF6分解气在线检测系统方案,实现对H2S、HF和CO这3种气体测量.数据分析表明,系统检测精度优于5×10-7,表明该系统满足电力行业在线测量的需求.